Welcome to
850 Armor Works
Featured Products
⭐⭐Please understand that these are custom made items and require a lead time to complete. We are a small shop with limited hours (and people at this moment😣). Thank you SO MUCH for your patience!⭐⭐
Made from 2mm ABS plastic in either white or black (color is not guaranteed but we will try to make it in your preferred color choice.)
Full kit photos on the carpet table display the full kit with all resin and rubber details.
What is included:
Collar (front and back)
Chest
Back
Side wings
Biceps
Shoulder Bells
Shins
Resin parts
Rubber parts
What is NOT included:
Soft parts
Helmet
Tactical brilliance (you’re on your own for that one, we just make the costumes)
Instant street cred with stormtroopers (results may vary)
Armor is made from 2mm ABS plastic in an option of black or white ***DEPENDING ON STOCK AVAILABILITY!!***
⭐⭐Please understand that these are custom made items and require a lead time to complete. We are a small shop with limited hours (and people at this moment😣). Thank youSO MUCH for your patience!⭐⭐
➡️Our Youtube Tutorial Series: https://www.youtube.com/playlist?list=PLnxn_kog44f...⬅️
We are including two full kidney pieces to allow a near universal fit without major modifications. This suit will be suitable for basic and level 3 501st approval when PROPERLY finished. We believe it is more accurate than the CRL standard.
**Model building skills and painting are required for this project. You will need to trim (unless you decide to add on the trim pack), sand, assemble, strap, and paint.**
Included in kit:
Chest
Back
Shoulder Straps
Abdomen, (NO RESIN DETAILS INCLUDED)
Kidney with block
Smooth kidney
Back Rectangle(trauma plate)
Belt with separate detail boxes
Extra ABS for belt wrap around 36"x3" strip approximately
Thermal detonator end caps
Thermal detonator shells
Thermal detonator cover plate
Thighs, left and right
Shins/Calves
Sniper knee plate
Shoulder bells
Biceps
Forearms
Hand guards, left and right
Resin Parts
What's NOT included:
Soft Parts
Perfect aim (that's on you, not us! We just make make the armor to the Empire's standards)
The ability to intimidate a Wookiee (but points for trying!)
Don't forget to follow us on Facebook and view additional pictures plus tutorials are coming soon.
Imperial Royal Guard helmet kit
2mm vacuum formed ABS plastic
Raw kit requires edge trimming, assembly, filling, and paint.
Fully finished, the above is done and painted with 2k urethane primer, black basecoat, and single stage urethane automotive paint. Eye lens installed.
Helmet model by Big Fred's Customs. Modified for size.
2mm white ABS plastic
Full production begins November 2025
Untrimmed as pictured, trimming option available as an add on. We cut the mold flashing to the cut lines. Additional edge sanding required. Saves you hours upon hours of time.
Kit comes as pictured with all parts including helmet (rubber brow and neck trim included) plus, pvc pipe for canister, ABS cover strips and ABS for belt. Stickers not included.
Add ons coming soon:
Helmet stickers (Now available!)
Holster
Canvas belt
DISCLAIMER: All of our builds are made by hand, built one at a time, there may be minor flaws/mistakes that do not affect overall appearance of the costume.
⭐⭐Finished armor will take a MINIMUM of 6 to 8 months from the time of order. ** Due to high order volume, orders will take longer to ship out**⭐⭐
Our armor is and has been 501st approved.
That's the purpose of it. This is not saying it will be approved out of the box. There may be minor fit and tweaking to do before approval.
This listing is for a custom commission of our Death Trooper armor! (NO HELMET!! It CAN be added on)
It will be made to order.
We will require a measurement chart be filled out by you before we can begin work on your armor. We have built a lot of these suits and look forward to doing one for you. Our custom work can take a bit of time. We only ask some patience while we finish our jobs and clear our workbenches when your order comes up in our queue.
Finished armor will take a minimum of 6 to 8 months from the time of order. ** Due to high order volume, orders will take longer to ship out**
The base armor is made from:
2mm vacuum formed ABS plastic with some urethane resin, rubber details, and resin 3D printed rectangle back detail.
Helmet (this is an add-on NOT INCLUDED)
Roto-cast resin with 3 LED lights installed.
Helmet is 3D designed by NerdForgeDesigns. Mold and casting work done by us. Helmet fits up to 25" circumference.
⭐⭐⭐The armor is finished and painted with automotive paint. This DOES NOT mean the paint job is perfect, but it sure looks FANTASTIC and is some seriously durable paint! We do not paint with spray paint. The kit IS weathered as it is supposed to be. ⭐⭐⭐
***If you want a PERFECT finish that will add an additional $3000 to purchasing price and will add significant additional lead time***
Full build kit Consists of the following:
Full body armor
Belt with pouches, boxes, holster, and leather pouch.
Leg suspension belt
DOES NOT INCLUDE:
Helmet (includes LED lights.)
Rangefinder is on add-on but not required.
Bodysuit
Blaster (email us for a quote to add a weapon to your order 850armorworks@gmail.com)
Boots, Doc Marten Talib style
Gloves
Model pictured above is 6'2" tall, 205lbs.
DT armor is almost a universal fit. The abdomen is not enclosed. The chest/back have no issues fitting a size 48-52 jacket. We can fit these to most sizes without any issues. It was designed "tall", but we can cut it down to fit as small as 5'5".
Essentially wearable out of the box. Will require you to do final fitting, minor adjustments, and padding for comfort. You may need to add a little velcro on the thighs during adjustments and permanently connect the shoulder/shoulder bell/bicep as they are connected with velcro for adjustment.
We do update parts as needed throughout the year. Your suit may not look like the pictures, but updates mean better! We do our best to edit pictures when we get new ones.
https://850armorworks.com/
https://www.facebook.com/850armorworks
https://www.instagram.com/850armorworksofficial/
https://www.youtube.com/channel/UCvXRNSunrICbXype9...
https://www.amazon.com/shop/850armorworks
***We do not accept REFUNDS, RETURNS, and EXCHANGES after 24 hours of purchase. Upon purchase you are committing to this agreement. If you find that you need your money back you may resell your order once in hand to another party or in the case of a kit - build it and sell it as a fully assembled suit. From the time of your purchase, we immediately reserve available and/or order materials required. Refunds cause disruptions to our manufacturing abilities. ***
******PLASTIC ONLY********
NO RESIN OR RUBBER PARTS
THE ONLY RESIN DETAIL INCLUDED: Resin Back Plate
Armor is made from 2mm ABS plastic in an option of black or white ***DEPENDING ON STOCK AVAILABILITY!!***
(rubber, and urethane resin details NOT included but sold separately)
Size this kit should fit is roughly 4ft - 5ft in height
Full parts list:
Chest
Back
Abdomen
Kidney
Codpiece
Posterior plate
Thighs
Hamstrings
Shins
Calves
Calf spoons
Knees
Shoulder bells
Elbows
Forearms
Hand plates
NOT INCLUDED:
Undersuit components
Boots
Gloves
Weapon
Resin parts
Rubber parts
A manual on being underestimated (trust us, that’s on you)
Training on how to look fierce (it’s genetic, we unfortunately can't help you with that)
You will have to do the all the assembling
Available Upgrade:
Trim Pack - We trim the excess plastic as close to the cut lines as possible guaranteeing the trim is where it needs to be with no mishaps. You WILLSTILL have to sand the edges.
⭐⭐Please understand that these are custom made items and require a lead time to complete. We are a small shop with limited hours. Thank you for your patience!⭐⭐
(The finished kit is just to show what it should look like when fully put together)
Shipping lead time is INVENTORY DEPENDENT. In many cases it will ship out within 2-3 weeks but can ship out with in a week depending on inventory levels.
Inventory is raw plastic and boxed plastic (ready to ship and boxed up) inventory in stock
******Please see current inventory levels to determine.
If you have any questions, don't hesitate to ask.
We do update parts as needed throughout the year. Your kit may not look like the pictures, but updates mean better! We do our best to edit pictures when we get new ones.
Praetorean guard armor kit
2mm ABS plastic, PETG printed ankles, resin printed details, resin forearm cover strips, ready to fight Paz Vizsla.
Torso: 850armorworks
Armor parts: Galactic Armory
Helmet: Mystery makers
DISCLAIMER: All of our builds are made by hand, built one at a time, there maybe minor flaws/mistakes that do not affect overall appearance of the costume.
We get a lot of people who have issues assembling their armor whatever it may be. Thankfully, we're pretty well experienced at building our armor.
By offering our armor this way, we will be saving tons of time and frustration. The armor is ready for paint and final assembly i.e. belt fitting, abdomen over the shoulder straps, velcro and strapping for the shoulder bell and bicep connections, and padding of calves and forearms if needed.
Measurements will be required for the abdomen and chest mostly. Our armor does well for a very general fit, but we may need to add extensions for the abdomen. We will also need to know of any unruly measurements. Specifically if you're heavyset, short, a power lifter, etc.... Our base armor will fit a wide variety of body types and sizes. The ectomorph body type works best. We design our armor TALL. Front measurement of calf from bottom to top is 17". Stomach measurements we are comfortable with up to 58" circumference. Chest/jacket sizes from 42 to 54. You may have to make modifications before painting for proper fit to your body.
Armor is made from BLACK 2mm ABS plastic, urethane rubber straps, urethane resin details and new fiberglass rectangle back detail.
Armor meets 501st spec when finished and painted.
Full parts list:
Chest Assembly with collar, gorget, and side wings
Abdomen assembly with rectangular trauma plate closure
Shoulder bells: trimmed, sanded, and strapped
Biceps: assembled and strapped
Forearms: assembled and strapped
Hand guards: Velcro attached to rear ready to glue to gloves
Calf assembly, left and right: Assembled. Straps run continuously with no split and velcro. Rear is split and attaches with velcro
Belt: Two pieces of 1.5" nylon sewn together with appropriate stitching, 48" in length
Belt Components: Resin buckle, 2 resin pyramids, vacuum form boxes backed with wood to secure to belt post paint, canister assembly
NOT INCLUDED:
Undersuit components
Boots: Orca Bay Brecon style
Gloves: Imperial Boots
Helmets: are an add-on
Blaster: (email us for a quote to add a weapon to your order 850armorworks@gmail.com)
Note that we have multiple finish options including options with a helmet. Black ABS, ready to paint. Black ABS with a ready to paint helmet kit, completely painted without a helmet, and fully painted with a painted helmet.
Please understand that this is a custom made item and requires a lead time to complete. We are a small shop with limited hours.
Finished armor will take a minimum of 6 to 8 months from the time of order. Kits ship within 6 to 8 weeks. Due to high order volume, orders will take longer to ship out
We have different finish options available. Prices vary per option. The black ABS commander set requires us to paint it white first, hence the higher cost. If you have any questions, don't hesitate to ask.
***We do not accept REFUNDS, RETURNS, and EXCHANGES after 24 hours of purchase. Upon purchase you are committing to this agreement. If you find that you need your money back you may resell your order once in hand to another party or in the case of a kit - build it and sell it as a fully assembled suit. From the time of your purchase, we immediately reserve available and/or order materials required. Refunds cause disruptions to our manufacturing abilities. **
Stop struggling with shears and Dremels that crack your material. We’ve done the hard part for you. These lenses are precision-cut on our laser for clean, sealed edges that are ready to install.
Made from high-quality 1/16 Polycarbonate that we have tinted in 3 different colors (more colors to come at a later time as well as more sizes), this material is superior to standard acrylic. It is shatter-resistant and—crucially for bucket builders—heat-formable. You can gently heat (these are tinted and you do not want to melt the tinting) this lens to curve it perfectly to the inside of your helmet without it snapping.
Ideal for:
Mandalorian Mercs builds (Check your CRLs, but this is a standard base!)
Most custom 3D printed helmets
Replacing flimsy stock visors
WHAT IS NOT INCLUDED (Read this, nerf herders):
The Helmet: You get the plastic piece for your eyes. You do not get the bucket.
Beskar: This is polycarbonate. It will stop a bug at 60mph, but it will not stop a blaster bolt.
Installation: I cut it; you glue it.
Din Djarin: He is busy (so is Boba-Fett, we asked).
Fun Fact:
Did you know - The original Boba Fett helmet used in The Empire Strikes Back didn't actually have a T-visor lens that you could see through clearly. Jeremy Bulloch (the actor) often complained he couldn't see a thing! In some close-ups, you can actually see the actor's eyes through the visor if the lighting hits it wrong. We promise ours offer much better visibility than 1980s prop tech.
Services we offer
Are you in need of ASAP delivery? We are hiring additional workers to meet up with demand so now we are able to offer the 850 Armor Works KIT Rushed Service. With the 850 Armor Works KIT Rushed Service we will push your order to the top of our to do list and will ship out your KIT within 2 weeks of purchase. This can apply to new or existing orders.
Due to 2024 bookings, please contact us first for a build rush. We're a bit swamped and don't want to take too much attention away from what is currently in progress.
Are you in need of ASAP delivery? We are hiring additional workers to meet up with demand so now we are able to offer the 850 Armor Works BUILDS Rushed Service. With the 850 Armor Works BUILDS Rushed Service we will push your order to the top of our to do list and will ship out your BUILD within 4-6 weeks of purchase. This can apply to new or existing orders.
Our
company ethos
We strive to make quality and affordable kits! We really enjoy making every kit we send out and truly want everyone to enjoy cosplaying as much as we do!
Follow us on social
YouTube
TikTok
